NEWTRON technology and tips respond to practitioners clinical expertise.
The ultrasonic micro-oscillations transmitted from the handpiece to the tip generate perfectly linear movement. Therefore the tip undergoes to-and-fro movements in the axis of the handpiece.
The active area of each tip is located on the distal 2-3 mm. This working section may be applied on the surface to be treated, moving progressively from the crown to the root.
Acteon Newtron Endodontic Tip CAP1 - F88181
Endosuccess Canal Access Prep
- Micro-blade tip length 12mm, taper 6%
The CAP1 tip is used with the active lateral part for:
- Finishing walls and polishing
- Removing temporary cement and dentinal residues
- Removing dentine overhangs
The CAP1 tip has a non-active end to prevent the risk of perforating the pulp chamber floor
Acteon Newtron Endodontic Tip CAP2 - F88182
Endosuccess Canal Access Prep
- Micro-blade tip, length 9mm, taper 5%
The CAP2 tip has an active lateral part and extremity and is used by sweeping method to remove dentine bridges.
- Location of the MB2 (2nd mesiobuccal canal) and search for hidden canals.
- Preparation of the pulp chamber.
- Removal of the dentine layer which may hide the access to the MB2 canal.
Acteon Newtron Endodontic Tip CAP3 - F88183
Endosuccess Canal Access Prep
- Micro-blade tip, length 8mm, taper 6%
The CAP3 tip has a very pointed extremity indicated for:
- Locating and opening calcified canals.
- Fragmenting calcifications or pulp stones in the pulp chamber.
- Loosening fibre posts.
- Location accessory canals.
Due to its very sharp point, the CAP3 tip must be handled with care (visual aids recommended).
The micro-blades are less aggressive than diamond and their coating makes these tips very durable.
Acteon Newtron Endodontic Tip ET18D - F88017
Endosuccess Canal Access Prep
- Diamond-coated steel tip 76μm, length 18mm, taper 5%
The ET18D tip is a diamond-coated tip for:
- Finishing the access cavity.
- Removing dentine overhangs, calcifications and filling materials.
Acteon Newtron Endodontic Tip ETBD - F88020
Endosuccess Canal Access Prep
- Diamond-coated ball tip, length 20mm, taper 5%
Diamond-coated ball tip for searching for canals and locating calcified canals.
Acteon Newtron Endodontic Tip ET20 - F88011
Canal Retreatment
- Retreatment tip, length 20mm, taper 6%
The ET20 steel tip is used in the 1st coroanl third:
- Extraction of filling material, silver points, broken instruments.
- Removal of debris and the smear layer.
Acteon Newtron Endodontic Tip ET20D - F88013
Canal Retreatment
- Diamond-coated retreatment tip, 30μm, length 20mm, taper 5%
The ET20D tip in diamond-coated steel is used in the 1st coronal third to remove very hard materials by brushing the walls.
The diamond coating of the ET20D tip increases the cutting and lateral abrasion effect.
Acteon Newtron Endodontic Tip ET25 - F88018
Canal Retreatment
- Titanium-Niobium tip, length 20mm, taper 3%
Suggested tip for retreatment in the middle and apical thirds and the extraction of broken instruments.
The Titanium-Niobium alloy of the ET25 range allows perfect transmission of the ultrasonic vibrations and tip flexibility.
Acteon Newtron Endodontic Tip ET25S - F88021
Canal Retreatment
- Short Titanium-Niobium tip, length 15mm, taper 4%
The ET25S (short) tip is designed for retreatment in the coronal third and the isthmuses.
The Titanium-Niobium alloy of the ET25 range allows perfect transmission of the ultrasonic vibrations and tip flexibility.
Acteon Newtron Endodontic Tip ET25L - F88022
Canal Retreatment and Obturation
- Long Titanium-Niobium tip, length 25mm, taper 3%
The ET25L (long) tip is suitable for retreatment in the apical third and long, straight canals.
The ET25 tips can be pre-formed for the treatment of curved canals.
Acteon Newtron Endodontic Tip ET40 - F88012
Canal Retreatment and Obturation
- Long retreatment tip, 40mm, taper 4%
The ET40 is a steel tip for rapid removal of broken instruments in the middle third of wide, straight canals.
Acteon Newtron Endodontic Tip ET40D - F88014
Canal Retreatment and Obturation
- Long retreatment tip, 40mm, diamond-coated 30μm, taper 4%
The ET40D is a diamond-coated steel tip for the retreatment of very hard material in the middle third of wide, straight canals.
Acteon Newtron Endodontic Tip SO4 - F88009
Canal Retreatment and Obturation
- Finer condenser, length 40mm, taper 4%
The SO4 tip is designed for lateral condensation of gutta percha by heating effect. It is used dry, without irrigation.
Acteon Newtron Endodontic Tip AS3D - F00065
Apical Surgery
- Diamond-coated universal tip 30μm, length 3mm, taper 9%
The AS3D tip is intended for apical surgery of anterior teeth. It should be used without pressure, at the lowest possible effective power.
Acteon Newtron Endodontic Tip AS6D - F00079
Apical Surgery
- Diamond-coated universal tip 30μm, length 6mm, taper 9%
Second instrument in the sequence, it should be used to obtain a preparation length of 5mm.
Acteon Newtron Endodontic Tip AS9D - F00067
Apical Surgery
- Diamond-coated tip 30μm, length 9mm, taper 8%
The AS9D tip is for complex cases and allows preparation of the root canal up to the coronal third. The diamond coating of the AS9D is only present on the extremity of the instrument not to over-prepare the canal.
The AS9D tip should first be introduced into the canal and orientated in the root axis before being activated to prevent the creation of a "false route"
Acteon Newtron Endodontic Tip ASRD - F00081
Apical Surgery
- Right-orientated tip, diamond-coated tip 30μm, length 3mm, taper 10%
The ASRD tip is recommended for apical surgery of premolars and molars.
The Apical Surgery kit, with its unique 3-6-9mm concept, offers a controlled retrograde endodontic treatment with greater preservation of bone and dental tissue.
Acteon Newtron Endodontic Tip ASLD - F00080
Apical Surgery
- Left-orientated tip, diamond-coated tip 30μm, length 3mm, taper 10%
Recommended for apical surgery of premolars and molars. This instrument should be used with very light pressure.
Acteon Newtron Endodontic Tip S12-70D - F00118
Retro Surgery
- Retro surgery tip angled at 70°, diamond-coated 30μm, length 5mm, taper 9%
The S12-70D tip is recommended for the treatment of posterior areas, in canals that are difficult to access or roots with specific orientations.
Acteon Newtron Endodontic Tip P14D - F00106
Retro Surgery
- Universal retro surgery tip, diamond-coated 30μm, length 5mm, taper 7%
The P14D tip is recommended for the preparation of anterior teeth.
The micro-retro tips make minimum treatment possible providing fast healing.
Acteon Newtron Endodontic Tip P15LD - F00107
Retro Surgery
- Left-orientated retro surgery tip, diamond-coated 30μm, length 5mm, taper 7%
The P15LD is recommended for the preparation of premolar and molar canals.
Acteon Newtron Endodontic Tip P15RD - F00108
Retro Surgery
- Right-orientated retro surgery tip, diamond-coated 30μm, length 5mm, taper 7%
The P15RD is recommended for the preparation of premolar and molar canals.
Acteon Newtron EndoSuccess Canal Access Prep Kit - F88180
Supplied with:
- CAP1, CAP2, and CAP3 tips
- Metal holder
- Autoclavable universal wrench
Acteon Newtron EndoSuccess Retreatment Kit - F00737
Supplied with:
- ET18D, ET20, ET25, ET25S, ETBT, and ETPR tips
- Metal holder
- Autoclavable universal wrench
Acteon Newtron EndoSuccess Apical Surgery Kit - F00069
Supplied with:
- AS3D, AS6D, AS9D, ASLD and ASRD tips
- Metal holder
- Autoclavable universal wrench
Acteon Newtron EndoSuccess Endo OneKit - F00732
Supplied with:
- CAP1, CAP2, CAP3, , ET25, ETPR, 1 pack 4 Irrisafe 25-21 tips
- Metal holder
- Autoclavable universal wrench
