NEWTRON technology and tips respond to practitioners clinical expertise.
The ultrasonic micro-oscillations transmitted from the handpiece to the tip generate perfectly linear movement. Therefore the tip undergoes to-and-fro movements in the axis of the handpiece.
The active area of each tip is located on the distal 2-3 mm. This working section may be applied on the surface to be treated, moving progressively from the crown to the root.
Acteon Newtron Prosthetic Finishing with Chamfered Shape Tip PM1 - F02250
PerfectMargin Rounded
- Preparation, rounded edge, diamond-coated tip 76μm
First instrument of the ultrasonic sequence, following the rotary phase. Intrasulcular dentine preparation and positioning of the finishing line.
PerfectMargin Rounded and Shoulder tip have a laser marking at 1mm to control their penetration into the sulcus.
Acteon Newtron Prosthetic Finishing with Chamfered Shape Tip PM2 - F02251
PerfectMargin Rounded
- Finishing, rounded edge, diamond-coated tip 46μm
Correction of irregularities in the finish line and start of polishing. Its diamond coating, less dense than on the PM1, makes it possible to obtain a cutting edge finish.
Acteon Newtron Prosthetic Finishing with Chamfered Shape Tip PM3 - F02252
PerfectMargin Rounded
- Polishing, rounded edge, smooth
This entirely smooth instrument is last in the finishing sequence, improving the condition of the surface at the cervical limit before impression taking.
Acteon Newtron Prosthetic Finishing with Chamfered Shape Tip PM4 - F02253
PerfectMargin Rounded
- Corono-radicular preparation, conical, diamond-coated 46μm
After the rotating phase the PM4 tip us ised to:
- Prepare the upper 1/3 of the canal chamber.
- Shape anatomically the connection cone.
- Clean the root walls.
- Smooth the entry cones for the anatomical posts.
The PM4 tip is available in both PerfectMargin kits
Acteon Newtron Prosthetic Finishing with Shoulder Shape Tip PMS1 - F02254
PerfectMargin Shoulder
- Preparation, shoulder shape, diamond-coated tip 76μm
First instrument of the ultrasonic sequence, after the rotary phase.
Penetration of the sulcus to continue preparation of the dentine, in order to correct the "lip" of the preparation and obtain a shoulder-shape finishing line.
Acteon Newtron Prosthetic Finishing with Shoulder Shape Tip PMS2 - F02255
PerfectMargin Shoulder
- Finishing, shoulder shape, diamond-coated tip 46μm
Shoulder shape finishing line without risk of a lesion in the attachment system, and beginning of polishing thanks to its lower grit diamond-coating.
When the yellow setting of the ultrasonic generator is used, PM2, and PMS2 can be used for polishing the dentine.
Acteon Newtron Prosthetic Finishing with Shoulder Shape Tip PMS3 - F02256
PerfectMargin Shoulder
- Polishing, shoulder shape, smooth
Polishing and improvement in the surface.
Finishing with a smooth tip enables a better quality of impression taking and provides better cement adhesion.
Acteon Newtron Ceramic Veneers Finishing Tip PMV1 - F02021
PerfectMargin Veneers
- Diamond-coated ball 107μm
Perform cuts on the incisal edge by controlling the depth with the round tip radius. Then join the depth cuts to obtain an homothetic reduction of 1.5mm.
Complete the vestibular reduction.
Acteon Newtron Ceramic Veneers Finishing Tip PMV2 - F02022
PerfectMargin Veneers
- Diamond-coated external spoon 107 μm
After gingival retraction with Expasyl® place the gingival finishing lines margins using the PMV2 tip parallel to the surface to be prepared.
Place the interproximal finishing lines using the PMV2 and PMV3 tips, with chuck maintained perpendicular on the surface.
Acteon Newtron Ceramic Veneers Finishing Tip PMV3 - F02023
PerfectMargin Veneers
- Diamond-coated internal spoon 107 μm
Place the incisal margins in butt-margin using the PMV3 tip, perpendicular to the prepared surface.
Then join the incisal and proximal finish lines with the PMV2/PMV3.
The positioning of interproximal finishing lines with the PMV2 and 3 tips enables to establish a rotational path of insertion for veneers.
Acteon Newtron Ceramic Veneers Finishing Tip PMV4 - F02024
PerfectMargin Veneers
- Smooth external spoon
Polish the interproximal and gingival finishing lines with PMV4 and PMV5 tips, with chuck maintained perpendicular on the surface.
Acteon Newtron Ceramic Veneers Finishing Tip PMV5 - F02025
PerfectMargin Veneers
- Smooth internal spoon
Polish the interproximal and gingival finishing lines with PMV4 andn PMV5 tips, with chuck maintained perpendicular on the surface
Acteon Newtron Ceramic Veneers Finishing Tip PMV6 - F02026
PerfectMargin Veneers
- Smooth ball
Polish the vestibular surface and the incisal finishing lines.
Acteon Newtron Loosening and Condensation Tip 5AE - F00249
- Loosening with spray
Recommended for the loosening of root canal posts, in combination with endodontic retreatment tips, and crowns.
Apply the 5AE tip on the lingual or palatine surface and the buccal surface, before finishing with the occlusal surface. Use the flat extremity of the instrument held firmly against the tooth.
This tip has a spray orifice, making it possible to cool the operative field to compensate the heating effect transmitted to the prosthetic structure on the underlying tooth
Acteon Newtron Loosening and Condensation Tip C20 - F00113
- Condensation, Piezocem
Condensation tip for inlays or onlays on posterior teeth.
The application is performed by sequences of ten seconds each time, until the prosthesis is perfectly integrated into the cavity.
In general two to three sequences are sufficient; after each sequence the excess cement is removed from the margin edges.
Acteon Newtron Loosening and Condensation Tip ETPR - F88019
- Loosening tip (post removal)
Powerful steel tip for loosening posts and crowns.
Used with irrigation, in contact with the prosthetic element to be loosened and at maximum power.
The ETPR tip has profiled and concave shape. It provides greater efficacy on the posterior teeth.
Acteon PerfectMargin Rounded Kit - F00738
Supplied with:
- PM1, PM2, PM3 and PM4 tips
- Metal holder
- Autoclavable universal wrench
Acteon PerfectMargin Veneers Kit - F02020
Supplied with:
- PMV1, PMV2, PMV3, PMV4, PMV5, and PMV6 tips
- Metal holder
- Autoclavable universal wrench