Testsealabs COVID-19 Antigen Test Cassette (Nasal Swab) – Box of 20


In stock

  • ARTG approved: 373151
  • Nasal test for COVID-19. This product has been tested and proven to detect multiple variants including Alpha, Beta, and the Delta variant.
  • 20 single use disposable tests per box


In stock

SKU: RATTEST Category: Tags: ,


The COVID-19 Antigen Test Cassette is a rapid chromatographic immunoassay for the qualitative detection of COVID-19 antigen in nasal swab specimen to aid in the diagnosis of COVID-19 viral infection.

How to collect the specimens?

Specimens obtained early during symptom onset will contain the highest viral titers; specimens obtained after five days of symptoms are more likely to produce negative results when compared to an RT-PCR assay. Inadequate specimen collection, improper specimen handling and/or transport may yield a falsely negative result; therefore, training in specimen collection is highly recommended due to the importance of specimen quality for generating accurate test results. Sample Collection Nasopharyngeal Swab Sample Insert minitip swab with a flexible shaft (wire or plastic) through the nostril parallel to the palate (not upwards) until resistance is encountered or the distance is equivalent to that from the ear to the nostril of the patient, indicating contact with the nasopharynx. Swab should reach depth equal to distance from nostrils to outer opening of the ear. Gently rub and roll the swab. Leave swab in place for several seconds to absorb secretions. Slowly remove swab while rotating it. Specimens can be collected from both sides using the same swab, but it is not necessary to collect specimens from both sides if the minitip is saturated with fluid from the first collection. If a deviated septum or blockage creates difficulty in obtaining the specimen from one nostril, use the same swab to obtain the specimen from the other nostril.


How to test ?

Allow the test, specimen, buffer and/or controls to reach room temperature 15-30’C (59-86’F) prior to testing.

1.Bring the pouch to room temperature before opening it. Remove the test device from the sealed pouch and use it as soon as possible.
2.Place the test device on a clean and level surface.
3.Unscrew the cap of the specimen buffer, push and rotate the swab with sample in the buffer tube. Rotate (twirl) swab shaft 10 times.
4.Hold the dropper vertically and transfer 3 drops of specimen solution to the specimen well, then start the timer. See illustration.

Wait for the colored line(s) to appear. Read results at 10 minutes. Do not interpret the result after 20 minutes.


Customer Support:

For help relating to using the product and interpreting the results please call 1800 773 463. This service is available between 9am – 7pm (AEST), or 9am – 8PM (AEDT), 7 days a week.


Useful downloads:



Video link instructions: https://www.youtube.com/watch?v=QF0VVZ_vMe0&t=86s


Go to Top