NEWTRON technology and tips respond to practitioners clinical expertise.
The ultrasonic micro-oscillations transmitted from the handpiece to the tip generate perfectly linear movement. Therefore the tip undergoes to-and-fro movements in the axis of the handpiece.
The active area of each tip is located on the distal 2-3 mm. This working section may be applied on the surface to be treated, moving progressively from the crown to the root.
Acteon Newtron Prosthetic Finishing with Chamfered Shape Tip PM1 - F02250
PerfectMargin Rounded
- Preparation, rounded edge, diamond-coated tip 76μm
First instrument of the ultrasonic sequence, following the rotary phase. Intrasulcular dentine preparation and positioning of the finishing line.
PerfectMargin Rounded and Shoulder tip have a laser marking at 1mm to control their penetration into the sulcus.
Acteon Newtron Prosthetic Finishing with Chamfered Shape Tip PM2 - F02251
PerfectMargin Rounded
- Finishing, rounded edge, diamond-coated tip 46μm
Correction of irregularities in the finish line and start of polishing. Its diamond coating, less dense than on the PM1, makes it possible to obtain a cutting edge finish.
Acteon Newtron Prosthetic Finishing with Chamfered Shape Tip PM3 - F02252
PerfectMargin Rounded
- Polishing, rounded edge, smooth
This entirely smooth instrument is last in the finishing sequence, improving the condition of the surface at the cervical limit before impression taking.
Acteon Newtron Prosthetic Finishing with Chamfered Shape Tip PM4 - F02253
PerfectMargin Rounded
- Corono-radicular preparation, conical, diamond-coated 46μm
After the rotating phase the PM4 tip us ised to:
- Prepare the upper 1/3 of the canal chamber.
- Shape anatomically the connection cone.
- Clean the root walls.
- Smooth the entry cones for the anatomical posts.
Acteon Newtron Loosening and Condensation Tip C20 - F00113
- Condensation, Piezocem
Condensation tip for inlays or onlays on posterior teeth.
The application is performed by sequences of ten seconds each time, until the prosthesis is perfectly integrated into the cavity.
In general two to three sequences are sufficient; after each sequence the excess cement is removed from the margin edges.
Acteon Newtron Loosening and Condensation Tip ETPR - F88019
- Loosening tip (post removal)
Powerful steel tip for loosening posts and crowns.
Used with irrigation, in contact with the prosthetic element to be loosened and at maximum power.
The ETPR tip has profiled and concave shape. It provides greater efficacy on the posterior teeth.
Acteon PerfectMargin Rounded Kit - F00738
Supplied with:
- PM1, PM2, PM3 and PM4 tips
- Metal holder
- Autoclavable universal wrench
Acteon PerfectMargin Veneers Kit - F02020
Supplied with:
- PMV1, PMV2, PMV3, PMV4, PMV5, and PMV6 tips
- Metal holder
- Autoclavable universal wrench
